Customized Products

Free sample -7 days shipment-after-sales service

Products

CUSTOM PRODUCT CATEGORY

Silicone Medical Hose_Silicone Medical Products_Silicone Tube Customization

The stress and hardness of silicone tube are increased with the increase of crosslinking density. The traditional vulcanization system can obtain higher constant elongation stress and hardness. Medical silicone tube soft, good stretch.

Lunch box seal ring_waterproof silicone ring_silicone seal ring

Silica gel is a new type of polymer elastic material, has good high temperature resistance and low temperature resistance, and good physiological stability, and can withstand repeated harsh and disinfection conditions, with excellent resilience and permanent deformation characteristics.

Extrusion Gas Fittings_Medical Silicone Fittings_Extrusion Silicone Fittings

Liquid silicone medical accessories have good medical properties, colorless, non-toxic, high temperature resistance, oxidation resistance, flexibility, and high transparency. Silicone products can solve bad medical problems and meet the medical effect of patients.

Foldable Silicone Lunch Box

Non-toxic, environmentally friendly, durable, easy to clean; wide range of use, easy to store, easy to clean, non-sticky, long service life, and safe and environmentally friendly, can be placed in the dishwasher, microwave oven, refrigerator, oven safe to use, Mingzhen Rubber and Plastics has many professional designers, welcome to map or sample design.

Bluetooth Audio Protective Cover

Small audio protective sleeve, small speaker silicone protective sleeve traditional shape is not rigid to enhance the beauty of the computer desktop.

Silicone Miscellaneous Pieces_Rubber Gear_Silicone Rubber Products

Silicone miscellaneous parts have high and low temperature resistance, maintain good elasticity in the temperature range of -70 ℃ ~ 260 ℃, and have many excellent properties such as waterproof, flame retardant, high temperature resistance, conductive, wear resistance, oil resistance, etc., which meet the EU environmental protection standard.

Who are we

About Us

Dongguan Minz Rubber & Plastics Co., Ltd. is an enterprise specializing in the development and production of silicone products and rubber products. Since its establishment in 2006, the factory has always adhered to the concept of "creating value for customers", rapid product development and high flexibility The production and service arrangements, as well as strict quality inspection, have enabled the company to develop rapidly and become a one-stop high-quality procurement supplier for many customers.

Company Profile

Company Profile


Casting famous brand
To win the trust of the world's customers

Enterprise culture

Corporate Culture


Work hard and constantly improve yourself
Honesty, Integrity and Responsibility

Certificate of Honor

Certificate of Honor


Keep improving, quality forever
Commitment, customer first

View more

Customized Service

Mingzhen Rubber and Plastic Engineer Team

WHY CHOOSE US

Brand comes from focus

01

16 years focus on the development and production of silicone rubber products, strong strength, guaranteed!

Strong technical strength, to provide you with high quality silicone rubber products


There is a production base of 10000 square meters, with more than 400 employees and a monthly production of 200KK silicone products. We have a wealth of sealing materials and sealing product expertise, free to assist customers in the development of design, and with the better product development program.

Domestic advanced precision silicone production equipment, precision silicone production equipment includes: hydraulic molding machine, rubber mixing machine, rubber cutting machine, sandblasting machine, specializing in providing one-stop customized silicone products mass production services.

02

Professional production management team

Senior engineers with more than 20 years of on-site supervision and strict management


The R & D team has more than 20 years of scientific research and production experience, providing technical support for continuous optimization of product production and improvement of product quality.

The skilled production staff has provided 13 years of research and development and customized services for silicone products in the Pearl River Delta and even all over the country. According to the product system structure scheme, the detailed design of the product is carried out, and the system integration is realized, and the silicone rubber design scheme is provided for you in time.

03

Strict quality management process to ensure high product quality

A number of international quality certification, layers of strict quality inspection


The company has a complete and scientific quality management system, the company's integrity, strength and product quality recognized by the industry, welcome friends from all walks of life to visit, guidance and business negotiations.

Full import ISO9001:2000 international quality management system, from raw material procurement to factory, each I sequence has a strict and scientific quality management process.

04

24-hour free consultation, so that the service becomes more intimate

Gold after-sales service, quick response, one-on-one intimate after-sales service


Professional online after-sales customer service team, pre-sales to provide technical guidance. After-sales customer service is online 24 hours a day to solve technical problems for you. Customer questions can be directly called complaints, comments directly to the name of the high-level.

Service Hotline: +86-136 6988 8704

Information

News

Company News

What are the fields of application of silicone keys for equipment

Characteristics and uses of silica gel Silicone is a kind of rubber. The vulcanized silicone rubber has heat resistance, cold resistance, ozone resistance, atmospheric aging resistance and good electrical insulation properties. The disadvantage of silicone rubber is that the tensile strength and elongation at break are small, and the compression deformation is large. Suitable for making parts used in high temperature, low temperature, sunlight, atmosphere, ozone environment and electrical insulation parts. Dimensional accuracy and recommend marking tolerance Trajectory material is an elastomer, compared to the plastic material, the direct impact of the shrinkage rate of many and complex factors, precision than plastic parts more difficult to do accurate, in the specific design should be fully considered, there should be no high precision. If the basic size is too large to meet the dimensional accuracy required by the design, it can be solved by the method of deformation of the positioning column with the substrate. Where dimensional accuracy is required, there must be room for convenient mold repair in the design. Etched text and patterns Silicone substrate can be designed out of the trademark pattern and text, in the molding products at the same time molding out. The group and text on the products are convex and concave two types, considering the convenience of mold processing, are generally designed as convex. In order to facilitate the replacement of marks or models, the marked parts can be designed as inserts during mold design. When the product model changes, only the marked parts in the mold cavity can be replaced to meet the needs of mark replacement. As part of this type of article, it should be designed to allow the presence of flash debris at the contour of the insert tile at the marked location. For conductive rubber, the stroke is generally 0.8~1.5mm; the exhaust groove (I. e. gas pit) is designed to prevent adsorption between the PCB and the key action. For tact switches, the stroke depends on the stroke of the switch itself (and the stroke for preventing misoperation), as described later. If the substrate is not bonded to the PCB board, the structural element of the air slot can be omitted. The key design has a hand feeling problem. Different graphs correspond to different hand feelings. According to experience, when (FP-FC)/FP is 40%-60%, the hand feeling is better. Key Typical Structure and Application According to the specific occasions where the keys are used, as well as the specific requirements of the product for the service life, pressing force, and hand feeling of the keys, the structure and application of the keys are shown in the following figure. The life of the silicone key is directly related to the material and the inclined wall structure, and is determined according to the design requirements. Part of the product silicone key life reference: Remote controller: 500000 times; Telephone type: 1 million times; Laptop computers: 4 million to 5 million times; Computer keyboard: 500~10 million; The life of silicone keys for monitoring products is defined as more than 500000 times; The ordinary life of B super silicone keys is defined as more than 1 million times,

Industry Dynamics

What is the difference between silicone plug and rubber plug

Silicone plug and rubber plug which one effect is good? Then today we will popularize their difference to where the end point is. First of all, rubber plug products, as a common type of industrial products and accessories, or have strong advantages, such as dust and water resistance, wear resistance, tear resistance, aging resistance, oil seal resistance and ozone radiation resistance, etc., while rubber materials are divided into various types, and the side materials over there can be made of dozens of compound materials, so different attribute functions can be deployed for different needs, as for some industries such as mechanical tight closure, electronic tight closure, vehicle construction and even aerospace and military industry, rubber blocking is the most suitable. Silicone rubber plug and rubber plug have one thing in common. They can be molded in the molding vulcanizer of silicone product manufacturers. The difference is that they are more environmentally friendly, have good high and low temperature resistance, feel better when touching by color hands, and can be in contact with human body skin for a long time. Therefore, silicone plugs for earphones and medical grade silicone plugs are widely used even in food silicone appliances, mainly or because of the material in particular the nature of the achievements of its scope of application. Silicone plug is different. Its material is mainly based on environmental protection advantages, material texture and comfortable application. Therefore, it is used in some electronic products, survival products and small-scale waterproof and dustproof household appliances. Its raw materials are mixed by precipitation method silica gel, high-fine molecular silicone gum and white carbon black. The molecular chain of the product is called heart, soft and comfortable to use! Compared with the materials of silica gel and rubber, they can be compared as follows: new technologies are used in traditional industries. Rubber materials have been heard for a long time in early years, so the comparison of rubber materials accounts for the majority. Up to now, more and more silicone rubber products have been reused because they can replace larger usage compared with rubber, namely environmental protection performance and various technologies, such as shape, pattern and color, etc. www.mingzhen2006.com