Welcome to the official website of Dongguan Minz Rubber & Plastics Co., Ltd.

中文简体  | English

Dongguan Mingzhen Rubber & Plastic Products Co., Ltd.

18 yearsFocus on R & D and production of silicone rubber products

Become a respected supplier of silicone rubber products

Service Hotline:

+86-136 6988 8704

Dongguan Mingzhen Rubber & Plastic Products Co., Ltd.
18 years focus on silicone rubber products research and development and production
Professional customization

Dongguan Minz Rubber & Plastics Co., Ltd.

Add.: No.4, New Industrial Road, Shipai Tangwei, shipai town, Dongguan City
Tel: +86-0769-8665 2688
Fax: +86-796-8180 6477
Contact: Miss Li +86-136 6988 8704
Mailbox:lixiaoxia@dgminz.com.cn

How to produce environmentally friendly packaging silicone products

How to produce environmentally friendly packaging silicone products

2021-04-02 14:37:55

There is a long-term harm to the environment. If it is not dealt with in time, it will lead to serious damage to the environment. Similar environmental signs such as "controlling environmental pollution and reappearing beautiful sun and blue sky" have long been seen frequently in the streets and alleys of the city, but they are often ignored by us. Industrial manufacturing garbage, large and small, can be seen everywhere in the suburbs of the city, in a variety of mechanical manufacturing among the silicone key rubber parts of the pollution can not be ignored, so now no matter in life, or in the work of the use of green silicone products. Why choose silicone products? Although silicone is also a material in rubber, it is incomparable to rubber and plastic for environmental protection. Its chemical properties are non-toxic and environmentally friendly materials, which are vulcanized by silicone product manufacturers at high temperature. In the production process, there is no pollution to the environment, and there will be no environmental pollution problems when used in various industries. How to do a good job in the outer packaging of silicone products is a problem that must be considered when each new product comes out. In today's active economy, consumer goods have emerged one after another. All kinds of daily necessities and industrial supplies are gradually replaced by silicone as raw materials. Silicone itself is a soft material with high temperature resistance and oil resistance. Liquid silicone products produced can be designed and produced according to their respective uses. Color box packaging is simple and convenient, mainly a transparent opp bag is packed into a color box, which can be printed with product patterns or company names required by customers. Such packaging is fashionable and simple, which is in line with the current consumption level. Blister packaging is mainly aimed at some of the requirements of the better silicone products, this type of silicone products mainly silicone kitchen utensils, to avoid product adsorption dust discoloration. Nowadays, people's living environment continues to decline, and our economic development is indeed the first stage of the world, with strong national strength and great plans. However, with the changes of society, our living environment and working environment are declining. In major cities, the catering industry, tourism industry, high consumption, high pollution of materials in the society, such as plastic bags, plastic boxes and so on, there are large amounts of toxic chemicals in the plastic material silicone products have potential harm to the body.

MORE
What is the difference between silicone products for mold printing and silk screen printing

What is the difference between silicone products for mold printing and silk screen printing

2021-03-31 16:32:49

According to his various properties, he can use it on unused application seats. Many of our medical adhesives are mainly used for medical cosmetic surgery, human organ repair, etc. Silica sol is mainly used on adhesives. Sealing ring beer glue is mainly used to help beer filtering effect. Many of our beers now use beer glue diatomite filtration to make beer brighter and clearer. All know that silicone products is a kind of green environmental protection products, in Europe and the United States are very popular, but some silicone products need to do some logo or pattern on the outer surface, so that consumers can leave a certain impression to deepen the understanding of the product brand. Screen printing is a post-stage process of liquid silica gel after silica gel products are formed. Screen printing is mainly used, which is different from mimeograph and color printing. The main tools are screen printing and oil brush. Screen printing is a pattern made of an iron frame or a wooden frame. This pattern is a pattern to be screen printed on silica gel products. When screen printing products, the screen printing is aligned with the plane where the products need to be printed, apply ink on the screen, and the ink will leak from the gap of the screen pattern to form a corresponding pattern on the silicone product. As we all know, the application of silica gel is widely used in various occasions and environments. Its use can be said to be a lot of things we can't think of. Whether it is inorganic silica gel or organic silica gel, it has long-term use in our life, work, products, military industry and so on. With the development of society, we need inorganic silica gel to prevent moisture in many places. Silica gel has very good adsorption capacity, it is a highly active chemical substance. Many things of my silicone products need to be pasted and can be made of silicone sol. In some industries, your accessories and parts need solid silicone with superior performance to make silicone accessories. Silica gel is divided into many types, generally organic silica gel and inorganic silica gel, from which many types of silicone products are subdivided. Inorganic silica gel is an amorphous chemical substance with strong adsorption force. According to the properties of various forms of chemical mixtures, various structural materials of silica gel keys can be distinguished as large holes, small holes, coarse holes, B- type silica gel, etc. It can be divided into silica sol, medical glue, beer glue, adsorption color-changing glue, particle glue, etc.

MORE
What if you produce elastic silicone products?

What if you produce elastic silicone products?

2021-03-26 11:20:43

For the transformation and transformation of silicone in the 1980 s and 1990 s and the continuous research and development of technology, silicone rubber products have changed in a certain sense in the society. As far as I know, silicone rubber products have just started in China in the past nine years. In the past, industrial accessories made of rubber were used, and many auto accessories made of sealed silicone keys were replaced by silicone products, because of the outstanding performance and the idea of environmental protection, the silicone rubber products were replaced. The elasticity of silicone rubber products has always been involved in the technical level. Many silicone products need such a parameter to measure the feasibility of the product. From the internal structure of silica gel, it is mainly that some small holes are closely arranged together, and then the sealing ring is combined into a whole. These small holes are embedded and interacted with each other by molecular structure. However, since silica gel is a kind of synthetic rubber, it is necessary to mix silica gel into a kind of mixed rubber before processing and molding. The mixed rubber is roughly the same as the original silica gel structure, except that some substances that will not affect its own performance are added. Under normal circumstances, before the production of silicone rubber products, are added vulcanizing agent, color glue, etc., and the main characteristics of this vulcanizing agent on the liquid silica gel is a reduction catalyst, in fact, the raw material itself on the elasticity of the finished product It does not have much influence, mainly the addition of some other substances will play a specific role. Then, what affects the characteristics of the whole product is the product structure. The softness of silica gel itself is an advantage of creating this characteristic. For example, if the structure of such products as silica gel buttons is not adjusted well, the material cannot be changed or adjusted. The elasticity of the whole product. When someone asks: "Do you know about silicone rubber products, do you know about silicone rubber products," whether you can touch and send them a satisfactory answer, with the continuous reduction of resources, the environment and the change of science and technology, silicone rubber products can bring what kind of value to the society. No one can know the value of rubber and plastic since it was discovered in the early days, but it has been used in some playthings, rubber balls, etc. Silicone products have not been widely used in the early days when silicone was gradually developed with the change of time. Subsequently, it has been widely used in military since the rise of silicone in the 1940 s.

MORE
What are the aging treatment methods of silicone products

What are the aging treatment methods of silicone products

2021-03-17 17:19:30

Needless to say, the effect of force is needless to say. After long-term tortuous force, the molecular formula of silicone rubber is destroyed. Excessive force leads to fracture and appearance deformation. The sealing ring effect of water. Silica gel is a highly adsorbed material that is insoluble in water and any liquid. However, long-term contact with water will cause water molecules to penetrate into the silica gel and destroy the basic properties of the material, resulting in product performance degradation and even discoloration. In the production process of silicone products, some products need to be glued or glued, so these processes are additional to the molding process. Liquid silicone needs to be combined with another product for silicone products, except for high-temperature secondary molding, which is glue. 1. Clean up the area where the silicone rubber miscellaneous parts need to be pasted with double-sided adhesive with white electric oil or toluene. 2. Add diluent according to the proportion and stir until use. 3. Apply the treating agent evenly to the areas where adhesive is needed on the silicone rubber miscellaneous parts. After applying evenly, place the silicone rubber miscellaneous parts in a cool and ventilated place for the treating agent to dry naturally. Many things in life will gradually become old and slow with the use of time, and people will become old, not to mention other things. However, silicone products will also age with the number of uses and the use environment, and the use performance will decline, when it comes to aging phenomenon, there are countless parts and components of silica gel in our life, so it is very likely that silica gel products will bring us more trouble in a casual mechanical part or small parts in our life. If silica gel is used for too long, with the aging of the environment, it can be seen that it is sticky and soft, the product has obvious edema, and the phenomenon of cracking upon hardening and tearing will also occur. The research shows that the aging phenomenon of silicone rubber products can be mainly from the use of the environment and the use of the region among the oxidation, heat, stress, liquid action lead to the phenomenon of accelerated aging of products, oxygen in ozone silicone keys damage performance is larger, silicone molecular chain compounds are different, resulting in silicone rubber products performance changes or reduced, thermal effect, silica gel can be resistant to high temperature, but the use of high temperature for a long time will cause the active polymer activator to cause the expansion of silicon atoms to appear soft, foaming and other phenomena.

MORE
Transparent color silicone products need to pay attention to what

Transparent color silicone products need to pay attention to what

2021-03-15 10:43:00

Why does the mold silica gel appear to dry outside and not dry inside? Everyone in the silica gel industry knows that silica gel products are not very good at cutting edges after processing. First, the staff take too long to press the mold during the cutting process. Second, the sealing ring is because the mold silica gel is solidified mainly by absorbing water in the air during the manufacturing process. The water completely evaporates and does not add a proper amount of water. This phenomenon occurs, this phenomenon does not belong to the product quality problem, but because there is no control of water, improve the storage period of silica gel, shelf life for a long time will appear some phenomenon, as long as the use of silica gel, add a small amount of water, you can. Why does the silicone product have the phenomenon of poor tensile force and mold burning? In the process of making the mold liquid silicone, in order to reduce the viscosity of the silicone product and make the silicone easy to operate, a large amount of silicone oil is added to the silicone, which will make the silicone become very soft, or the molding time is too short, resulting in the phenomenon of intolerable tensile force, reduced tear strength and poor tensile force, the mold burning is because the product is added with peroxide curing agent, the resin reaction will generate a lot of heat, the general curing time is 3 minutes, so 3 minutes after the release as soon as possible, in order to prevent the silicone mold will not produce the phenomenon of mold burning. When it comes to highly transparent products, many friends will think of "glue" plastic and plastic materials, and when it comes to highly transparent silicone products, it is no exception. For manufacturers of highly transparent solid silicone products, it may be more difficult to produce with PC,PE and acrylic materials, because plastic materials are precipitated and extruded by liquid solution, however, there will be some complicated problems in the molding process of solid silica gel material after mixing in the machine. For transparent color products, the main problem of appearance black spots is more serious. Many manufacturers of silicone products know that products with high brightness need great requirements in appearance, so the appearance of the surface of the product needs to be clean and tidy, feel comfortable, color balance, and the same or even higher for transparent products. In the production process, strict requirements are required for the environmental hygiene of rubber refining or molding, since the transparent color does not add any color glue during mixing, the impurities inside the glue can be seen by pressing the silicone button eye. Although there are no black spots on the appearance after molding and vulcanization are completed, a little other substance in the Products part will be seen by every consumer friend at a glance. Therefore, many manufacturers often have a slightly higher defect rate for transparent color products than others.

MORE
< 1...121314...109 > proceed page