Welcome to the official website of Dongguan Minz Rubber & Plastics Co., Ltd.

中文简体  | English

Dongguan Mingzhen Rubber & Plastic Products Co., Ltd.

18 yearsFocus on R & D and production of silicone rubber products

Become a respected supplier of silicone rubber products

Service Hotline:

+86-136 6988 8704

Dongguan Minz Rubber & Plastics Co., Ltd.

Add.: No.4, New Industrial Road, Shipai Tangwei, shipai town, Dongguan City
Tel: +86-0769-8665 2688
Fax: +86-796-8180 6477
Contact: Miss Li +86-136 6988 8704
Mailbox:lixiaoxia@dgminz.com.cn

Silicone mobile phone case aging_silicone cost control_silicone product customization must see

Release time:

2019-05-15 12:30

Source:

Silicone mobile phone case aging_silicone cost control_silicone product customization must see
 
Silicone mobile phone caseIn the process of long-term use of aging silicone protective sleeve, some people often find that its texture will change with the passage of time. In life, many silicone products also have the same phenomenon. However, mobile phone protective sleeve and electronic product peripheral protective sleeve belong to appearance parts, and their main function is to play the role of appearance protection and beauty. Therefore, improper use will lead to product problems. Silicone material belongs to good performance, non-toxic and environmental protection, the performance is outstanding and the tensile rate is strong, but there are still some products that will appear after long-term use. The main reason is that there are problems in the manufacturing process of Dongguan Silicone Products Factory and some methods and methods of raw materials.
 
Silicone rubber products industry in the normal use of products to functional decline is a certain period of time, basically more than 90% of the products will not have problems in the shelf life, and the products with problems need to figure out how to ensure the quality and the causes of symptoms smoothly.
 
First of allSilicone protective sleeveThere are many reasons for aging. Although the products did not distinguish themselves when they were first molded, they still depend on the environment, the people and the field of use in the later period. Some friends love their protective cover very much. As a treasure, they always protect the products from harm, while some friends do not care, it won't be long before aging begins to occur here. On the other hand, the protection methods of consumer friends are wrong. There are many scenes and environments in use. Although silica gel has various outstanding new functions, it is not a joke for some places such as ozone, humidity, strong light and liquid oxygen. However, cracks, discoloration and yellowing will occur after long-term wandering use, gradually began to appear oxidation reaction aging speed, which is one of the human factors.
 
Finally, there is a problem with the material itself. Some medium-made organotin flowing curing agents and reinforcing curing agents conflict. There is a little difference in the mixing ratio. The effect on fixed-line telephone is not good. Polysulfide compound polysulfone and urethane or amine-containing articles cannot be saturated. After addition, there is a combination reaction, which results in the phenomenon of overall non-curing and incomplete fixed-line telephone. Therefore, the material silicone product manufacturers have poor fluidity during processing, the product has bursting edges, different hardness and softness, and reduced stretch rebound.
 
Therefore, the reason why the silicone protective sleeve has aging symptoms and reduces its service life is firstly that you need to control it well, and secondly, you need to evaluate the quality of the product. If you really try to follow the conditions of use and still fail to achieve the effect, then you can only say that you have met a raw material blending technician who does not know much about silicone!
Silica gel cost control in recent years, business is not as good as before, the operating conditions of all walks of life are not ideal, no matter any industry competition is very fierce, just like the silicone products industry in recent years, after many setbacks, the upstream successfully broke out of the dangerous period and successfully doubled the unit price of raw materials in the previous two years, leaving behind is the downstream oil pressure, liquid manufacturers struggling like dead fish, therefore, many manufacturers may have never considered saving from cost control before, and the environmental protection and price adjustment of the 17-year raid have made many silicone rubber manufacturers begin to pay attention to this problem. So when it comes to cost, what can you control and what can you control?
 
The cost can be controlled from any place, such as packaging bags, mold washing water, glue, various tools, etc., but we must first take the general direction and start from the key point. First of all, for silicone raw materials, if the burr of the product can be controlled to 1% without defective rate in the molding process, then basically the budgeted raw materials can be processed by more than 10%, especially for some large silicone products, protective covers, silicone kitchenware, etc., that is, there can be no shortage of materials or waste of raw materials, then the technology of engineering test proofing is required, therefore, for the control of the general direction of raw materials and products, the plan must be made first in the early stage of the sample, which method is the most economical and efficient.
 
In addition, the secondary utilization of raw materials must be done well. Products with matching color and hardness do not need to use new materials. In addition to raw materials, the important thing is the startup and labor cost of the machine. The company's electricity charge is one of the highest consumption, while the electricity charge of the machine of silicone rubber products manufacturer can reach the height of 2500 yuan 24 hours a day, so it is the most expensive in the process of heating the upper and lower molds, if you stop a machine without turning off the power supply temperature, the money you spend in one day will be wasted again, so the general manufacturers have a certain minimum order quantity for customized products, which is officially related to these reasons.
 
In fact, the control of finished products is not a conclusion that can be drawn in a day or two. If a silicone product manufacturer saves 10 degrees of electricity per day for one machine, it will be 300 degrees in a month and 3000 degrees in a month for the ten machines. It is conceivable that you will save tens of thousands of electricity bills in a year. The same is true for other work necessities. No change can be seen in a day or two. After a long time, you may be shocked. Speaking of the current industry, if a silicone product manufacturer cannot make money on the profit and output of its products, it is still continuing to maintain, then it may be that the internal cost control is better, but the current silicone industry can only survive on the internal methods of production and cost control. The reason should be understood by everyone!
 
Silicone product customization must see when it comes to "miscellaneous parts", many expert friends may know the definition of these two words, which means that the formal is not complicated but mixed. Silicone miscellaneous parts are widely used in products, and its definition is the parts and small accessories on some main products, which are widely used, such as the well-known small fasteners, sealing and shock absorbing parts, electronic buffer parts, silicone gaskets, etc, however, these gadgets in various industries may be the most in demand in the silicone products industry.
 
As far as I know, many customers and friends will develop and design a new silicone miscellaneous product to match the main product every month or two, and get corresponding functions, such as shock absorption, decoration, beauty, cushioning, insulation, etc. However, some friends have some insufficient experience in customizing specific silicone accessories, and do they have any specific data on the use, effect and function of the product, at the end of the day, there is no awareness of what effects the product can bring to your main product. Therefore, Xiao Bian will popularize science for everyone today about the matters needing attention in the customization of silicone daily miscellaneous parts and small accessories!
 
Miscellaneous parts are basically small products. For products with relatively simple structures such as gaskets and shock-absorbing squares, attention should be paid to the material problems of the products. For materials to be shock-absorbing and pressure-resistant, it is necessary to see whether they can reach a certain degree of hardness and softness and the compressive resistance of raw materials. Whether shock-absorbing buffers need to be made of high-tensile gas-phase silica gel raw materials and whether they can have a certain service life capability in the subsequent use.
 
For the complicated structure and concave-convex holes, it is necessary to look at the adjustment and operation method of the operator to the machine during the processing, because some products are very important to control the vulcanization time, and the product will bulge after coming out of the mold, but the temperature drop will disappear, and the aging rate of all aspects of this product will accelerate in the subsequent use process, and whether the product has uneven weight and size error, this will lead to the use of deviation, dislocation and other problems. Finally, the appearance of miscellaneous parts, silicone rubber products manufacturers generally pay more attention to the processing of appearance parts, but you need to pay attention to whether the color mixing ratio is uniform when mixing rubber in time to prevent color errors.
 
There is no mixing glue, otherwise the color is not balanced. After the vulcanizing agent is added, whether the vulcanizing agent will be stored for a long time, which will cause the ineffective product of the vulcanizing agent to change color upon reaction, etc. During the processing, attention should be paid to the black spot impurities in the appearance, the mold closing line and the self-removing edge of the mold, etc.
 
Personally, I think that silicone miscellaneous products have become one of the most important accessories in the machinery industry and the electronics industry. Therefore, each processing step of the product needs to be carefully confirmed. Silicone rubber products are a complex process in the processing process. In addition to human factors, they are very important for mold processing and machine allocation, if you want to purchase high-precision silicone daily miscellaneous parts, you have to grope for each processing procedure!

Previous Page

Food Grade Silicone Benefits for Baby Products Mobile Phone Waterproof Artifact: Liquid Silicone

Silica gel keys appear above several colors silica gel keys quality?

Next Page

Previous Page

Food Grade Silicone Benefits for Baby Products Mobile Phone Waterproof Artifact: Liquid Silicone

Next Page

Silica gel keys appear above several colors silica gel keys quality?

More information

What is the difference between silicone plug and rubber plug

Silicone plug and rubber plug which one effect is good? Then today we will popularize their difference to where the end point is. First of all, rubber plug products, as a common type of industrial products and accessories, or have strong advantages, such as dust and water resistance, wear resistance, tear resistance, aging resistance, oil seal resistance and ozone radiation resistance, etc., while rubber materials are divided into various types, and the side materials over there can be made of dozens of compound materials, so different attribute functions can be deployed for different needs, as for some industries such as mechanical tight closure, electronic tight closure, vehicle construction and even aerospace and military industry, rubber blocking is the most suitable. Silicone rubber plug and rubber plug have one thing in common. They can be molded in the molding vulcanizer of silicone product manufacturers. The difference is that they are more environmentally friendly, have good high and low temperature resistance, feel better when touching by color hands, and can be in contact with human body skin for a long time. Therefore, silicone plugs for earphones and medical grade silicone plugs are widely used even in food silicone appliances, mainly or because of the material in particular the nature of the achievements of its scope of application. Silicone plug is different. Its material is mainly based on environmental protection advantages, material texture and comfortable application. Therefore, it is used in some electronic products, survival products and small-scale waterproof and dustproof household appliances. Its raw materials are mixed by precipitation method silica gel, high-fine molecular silicone gum and white carbon black. The molecular chain of the product is called heart, soft and comfortable to use! Compared with the materials of silica gel and rubber, they can be compared as follows: new technologies are used in traditional industries. Rubber materials have been heard for a long time in early years, so the comparison of rubber materials accounts for the majority. Up to now, more and more silicone rubber products have been reused because they can replace larger usage compared with rubber, namely environmental protection performance and various technologies, such as shape, pattern and color, etc. www.mingzhen2006.com

What are the fields of application of silicone keys for equipment

Characteristics and uses of silica gel Silicone is a kind of rubber. The vulcanized silicone rubber has heat resistance, cold resistance, ozone resistance, atmospheric aging resistance and good electrical insulation properties. The disadvantage of silicone rubber is that the tensile strength and elongation at break are small, and the compression deformation is large. Suitable for making parts used in high temperature, low temperature, sunlight, atmosphere, ozone environment and electrical insulation parts. Dimensional accuracy and recommend marking tolerance Trajectory material is an elastomer, compared to the plastic material, the direct impact of the shrinkage rate of many and complex factors, precision than plastic parts more difficult to do accurate, in the specific design should be fully considered, there should be no high precision. If the basic size is too large to meet the dimensional accuracy required by the design, it can be solved by the method of deformation of the positioning column with the substrate. Where dimensional accuracy is required, there must be room for convenient mold repair in the design. Etched text and patterns Silicone substrate can be designed out of the trademark pattern and text, in the molding products at the same time molding out. The group and text on the products are convex and concave two types, considering the convenience of mold processing, are generally designed as convex. In order to facilitate the replacement of marks or models, the marked parts can be designed as inserts during mold design. When the product model changes, only the marked parts in the mold cavity can be replaced to meet the needs of mark replacement. As part of this type of article, it should be designed to allow the presence of flash debris at the contour of the insert tile at the marked location. For conductive rubber, the stroke is generally 0.8~1.5mm; the exhaust groove (I. e. gas pit) is designed to prevent adsorption between the PCB and the key action. For tact switches, the stroke depends on the stroke of the switch itself (and the stroke for preventing misoperation), as described later. If the substrate is not bonded to the PCB board, the structural element of the air slot can be omitted. The key design has a hand feeling problem. Different graphs correspond to different hand feelings. According to experience, when (FP-FC)/FP is 40%-60%, the hand feeling is better. Key Typical Structure and Application According to the specific occasions where the keys are used, as well as the specific requirements of the product for the service life, pressing force, and hand feeling of the keys, the structure and application of the keys are shown in the following figure. The life of the silicone key is directly related to the material and the inclined wall structure, and is determined according to the design requirements. Part of the product silicone key life reference: Remote controller: 500000 times; Telephone type: 1 million times; Laptop computers: 4 million to 5 million times; Computer keyboard: 500~10 million; The life of silicone keys for monitoring products is defined as more than 500000 times; The ordinary life of B super silicone keys is defined as more than 1 million times,

The convenience of the use of industrial silicone buttons

In order to solve the above problems and technical defects, after continuous updating and design, a multi-station silicone button trimming machine was invented, and a utility model patent was applied. The utility model relates to a multi-position silicone button trimming machine, which comprises a base, a gantry frame and four cutting cylinders, and the four cutting cylinders are arranged vertically on the top of the gantry frame in a horizontal straight line. The beneficial effect achieved by the utility model is that the structure design is reasonable. By adopting the combination design of four reinforcement tables and four cutting blades on the gantry, the device can simultaneously trim four silicone button products. Thereby greatly improving the efficiency of trimming processing of silicone products. With the continuous expansion of the silicone button market, how to improve the processing efficiency of the silicone button has made producers pay more and more attention. The trimming of the silicone button is an important step in the production process of the silicone button, and the trimming of the traditional silicone button The processing efficiency cannot be improved, which affects the overall production efficiency of the silicone button. Various types of silica gel have different microporous structures due to their different manufacturing methods. The chemical composition and physical structure of silica gel determine that it has many characteristics that are difficult to replace other similar materials: high adsorption performance, good thermal stability, stable chemical properties, and high mechanical strength. Silica gel according to its pore size is divided into: macroporous silica gel, coarse pore silica gel, type B silica gel, fine pore silica gel. www.mingzhen2006.com

What are the molding techniques of rubber products?

Calendering: suitable for the manufacture of simple sheet, plate products. It is a method of pressing the mixture into a film through a calender called calendering. Some rubber products (such as tires, tape, hose, etc.) used in textile fiber materials, coated with a thin layer of glue, glue coating process is generally completed on the calender. The fiber material needs to be dried and dipped before calendering. The purpose of drying is to reduce the moisture content of the fiber material (so as to avoid water evaporation and foaming) and increase the temperature of the fiber material to ensure the quality of the calendering process. Dipper is the process before hanging glue, the purpose is to improve the binding performance of fiber materials and glue. Extrusion molding: Used for more complex rubber products, such as tire treads, rubber tubes, and metal wire surface coatings, which need to be manufactured by extrusion molding. The plastic mixture was placed into the hopper of the extruder. Under the extrusion of the screw, a method of continuous molding through a variety of mouth before pressing out, the rubber material is preheated to make the rubber material soft and easy to extrude, so as to obtain rubber products with smooth surface and accurate size. The rubber industry is one of the important basic industries of the national economy. It not only provides people with light industrial rubber products that are indispensable in daily life, but also provides various rubber production equipment or rubber parts for heavy and emerging industries (such as mining, transportation, construction, machinery and electronic products). It can be seen that there are many kinds of products in the rubber industry, and the backward industry is very extensive. Molding molding: can also be used to manufacture some complex shapes (such as cups, seals) of rubber products, with the help of the molding of the female and male molds, the rubber material is placed in the mold and heated. www.mingzhen2006.com

How to print the pattern on the transparent key

Some laser marking machines have played opaque keys. While using laser typing to knock out the paint, they will also burn the plastic parts that can transmit light, but cannot transmit light! Changzhou laser marking machine has a special device, which can adjust the machine to the function of laser processing light-transmitting key. The laser can clean the paint sprayed on the surface very clean without burning light-transmitting plastic, thus realizing light-transmitting key laser processing! YAG laser marking machine, the general laser marking machine can not do through the key! Light transmission keys, also called light transmission buttons, are widely used in electronic products. In dark environments, they can accurately and accurately find each button. The light transmission keys include a light transmission key body, an electronic switch located below the key body, and a luminous body. The luminous body is arranged on the lower side of the key body. A light guide body is arranged below the key body, and the light guide body has a body, the upper side of the body extends an extension to the position where the electronic switch is located, the outer surface of the extension is a first reflective slope, the lower surface of the body is a second reflective slope and doubles as a light touch surface that can be contacted with the electronic switch, and a light input part connected with the extension part and arranged corresponding to the light emitting body, the light emitting body emits light, the light is emitted to the first reflective slope through the introduction portion, and is reflected by the first reflective slope into the body, and the light entering the body is reflected by the second reflective slope out of the key body. The structure makes the light emitted from the light emitting surface of the key body more uniform, the key is more beautiful, and the user can accurately find the corresponding function key. The pattern and text on the keys are processed by laser typing! In our life, there are many keys and buttons that use laser typing and can transmit light, such as mobile phone keys, car audio keys, computer keys, and various electronic and electrical keys! www.mingzhen2006.com