Welcome to the official website of Dongguan Minz Rubber & Plastics Co., Ltd.

中文简体  | English

Dongguan Mingzhen Rubber & Plastic Products Co., Ltd.

18 yearsFocus on R & D and production of silicone rubber products

Become a respected supplier of silicone rubber products

Service Hotline:

+86-136 6988 8704

Dongguan Minz Rubber & Plastics Co., Ltd.

Add.: No.4, New Industrial Road, Shipai Tangwei, shipai town, Dongguan City
Tel: +86-0769-8665 2688
Fax: +86-796-8180 6477
Contact: Miss Li +86-136 6988 8704
Mailbox:lixiaoxia@dgminz.com.cn

Silicone protective sleeve to ensure quality, silicone products factory to ensure quality

Release time:

2019-05-21 12:30

Source:

Silicone Protective SleeveGuaranteed quality, silicone products factory to ensure quality
 
Silicone Protective SleeveGuaranteed quality. Silicone protective sleeve is more common in life, especially now. Silicone mobile phone sets and so on, so along with the market demand and the growth of user usage, the production requirements and quality of silicone protective covers are gradually increasing and improving the quality requirements.
 
Therefore, it is very important for consumers to choose a good brand of protective sleeve, while it is more important for merchants to choose a good manufacturer of source silicone products. It is very important to start from the source at any time. Strict requirements for product defect control are very important. In the eyes of manufacturers, the defect rate of silicone protective sleeve can only exceed 5% at most. If the defect rate is too high, then this product is meaningless.
 
Silicone protective sleeve in the processing process of the most prone to adverse phenomena have a few points.
 
1. The reasons for the appearance of white bubbles on the outside of the product can be divided into several phenomena: insufficient temperature, too long residence time of the mold after mold extraction, too much spray demoulding water, too short mold extraction time, and different vulcanization exhaust and stroke.
 
2. The inside and outside of the silicone protective sleeve are not ripe, and the surface is pockmarked. In the production process, the vulcanization time is too short and the temperature of the machine is too low, which may lead to immature vulcanization and incomplete vulcanization. In addition, the raw materials are placed for too long, which may lead to the failure of the vulcanizing agent of the rubber material. The main reason for the pitting phenomenon is that the mold temperature is too high and the speed of placing the raw materials cannot keep up with it.
 
3, the reason of the mold mold as the core of the processing function, the requirements for the appearance is also relatively strict, a good piece of steel can increase the number of times the mold is used tens of thousands of times stamping, so for the appearance of material discharge and so on can start from the mold, to find the reason, such as the depth of the discharge groove, the size of the mold closing line and so on
 
4. The reason for the personnel The arrangement of the personnel is also more important. The speed and understanding of the raw hands are slower than those of the skilled hands. The defective rate of the products that may be made without much experience in the processing process will be higher. Therefore, it is very important to strengthen the awareness of prevention and control of the operators.
 
In addition to the production of silicone protective sleeve in the silicone products manufacturers to produce a variety of silicone products experience, in fact, the above reasons are relatively long one of the bad phenomenon, such as the wind phenomenon is basically every silicone products will appear, but since there will be a variety of bad problems, then there are ways to deal with the bad phenomenon, for other bad phenomenon is not listed one by one.
 
The silicone protective sleeve in the production process of poor control requirements are very important, some protective sleeve weight can reach hundreds of grams of weight, if a product scrap that is wasted silicone raw materials and curing agent and toner, scrap a product cost can be said to be very high.
When it comes to the quality of silicone products, in recent years, the tools used in many aspects of silicone have long been in the market!
 
Although the price is expensive in foreign countries, it has always been favored by many families. The most special one is silicone daily necessities. In San Francisco, the United States, it is a place where many Chinese gather and a distribution point for many entrepreneurs and foreign trade companies. It has become a gathering place for many foreign friends, and a silicone product store of nationality is very popular, so the reporter interviewed the local people's views on silicone products: "Bendable, foldable and fall-proof, this kind of thing is not only environmentally friendly, but also has many styles. Basically, every household here has daily necessities made of silicone.
 
According to actual statistics, most of the imports and exports of silicone products in many countries in the world are in China, accounting for 60% of the world. Basically, they are designed by others and then processed in China. After external packaging, the price in foreign countries can be greatly increased. Therefore, when we think of the popular silicone daily necessities and household appliances produced in China, we definitely need the best quality!
In southern China, the competition in the silicone industry is quite fierce, and silicone manufacturers want to keep their jobs, it must start from the quality above, to provide customers with high-quality products to stabilize their jobs, of course, in addition to quality, first-class service and advanced speed is also necessary.
 
Now the silicone industry is different from the past. The first is the rapid price increase of the rubber material, the second industry's price competition, and the third own service technology! In the past few years, in addition to the technology must be mastered, competition and the stability of raw materials have left us without much vigilance, but now in the face of rising prices, peer bidding! If we don't do a good job in quality, how can we stabilize our jobs?
 
Starting from the source of the manufacturer, the control of the defective rate on the molding process is very important, so as a professional manufacturer of silicone products, the first point is to surpass others in quality and quality, and to make speed and service fast and time! Is the current division of the unified square standard.
 
In recent days, zero inventory of silicone raw materials has received news that many silicone products from the same industry have come to our company to borrow solid silicone raw materials. There is a serious shortage of 50-70 degree silicone raw materials in raw material manufacturers. Recently, Liu Chengjing, a member of the China Rubber Committee Association, said: Last quarter, the rubber market gathered in the market for natural rubber ushered in a new round of spring. The rising factors of raw materials led to the early rubber tapping season, causing the shortage of rubber supply, in the near future, inventory has been hoarded and there is a shortage of goods!
 
This is why rubber materials do not meet the market. Secondly, it can be seen in various countries and regions that abnormal weather is gradually beginning to usher in high temperature seasons. Rubber trees are delayed in opening rubber. Rain water and high temperature weather are affected. Rubber tapping has no original efficiency. In addition, due to insufficient labor force, there will be no growth in raw material products in many regions of our country this year! According to the relevant personnel analysis revealed that this phenomenon will affect the silicone products industry two problems,
 
1: glue will be in short supply in this quarter! Raw material suppliers are unable to provide raw materials normally. Second: raw materials are expected to usher in another price increase phenomenon! The phenomenon of rising raw materials has shown that rubber is difficult to buy and in China's silicone rubber products full of major provinces, rising raw materials has become an inevitable phenomenon!
 
However, from the perspective of sales volume, the consumption of silicone rubber products is obviously greater than expected. The products of major suppliers are basically fully digested by the market, and the supply is not required in the spot market. This also shows that the silicone rubber industry has attracted sales. A new height, China's silicone rubber industry is gradually recovering! Demand will be higher growth! As for the zero inventory of silicone raw materials, how can silicone product manufacturers ensure that customers do not rush for goods when they are in short supply?
 
It depends on whether the manufacturer can control the amount of raw materials and waste! For the solid silicone rubber industry, the company's cost can be controlled to the greatest extent by saving rubber materials as much as possible under the condition of ensuring that the silicone rubber products are not defective. Therefore, our company has recently held an emergency meeting that the rubber materials are about to be out of stock. The surplus materials, edge materials, feeding and so on of the products should be controlled to the minimum. If the rubber materials are out of control and the raw materials are used up, the products, how much raw materials will be replenished! Increase the vigilance of employees! On the one hand, control the cost of the company, on the other hand, control the use of rubber, in the absence of raw materials can still get, use!

Previous Page

The role of o-ring

Dongguan Silicone Products Factory emphasizes that the product is made of silica gel. What is the reason?

Next Page

Previous Page

The role of o-ring

Next Page

Dongguan Silicone Products Factory emphasizes that the product is made of silica gel. What is the reason?

More information

What is the difference between silicone plug and rubber plug

Silicone plug and rubber plug which one effect is good? Then today we will popularize their difference to where the end point is. First of all, rubber plug products, as a common type of industrial products and accessories, or have strong advantages, such as dust and water resistance, wear resistance, tear resistance, aging resistance, oil seal resistance and ozone radiation resistance, etc., while rubber materials are divided into various types, and the side materials over there can be made of dozens of compound materials, so different attribute functions can be deployed for different needs, as for some industries such as mechanical tight closure, electronic tight closure, vehicle construction and even aerospace and military industry, rubber blocking is the most suitable. Silicone rubber plug and rubber plug have one thing in common. They can be molded in the molding vulcanizer of silicone product manufacturers. The difference is that they are more environmentally friendly, have good high and low temperature resistance, feel better when touching by color hands, and can be in contact with human body skin for a long time. Therefore, silicone plugs for earphones and medical grade silicone plugs are widely used even in food silicone appliances, mainly or because of the material in particular the nature of the achievements of its scope of application. Silicone plug is different. Its material is mainly based on environmental protection advantages, material texture and comfortable application. Therefore, it is used in some electronic products, survival products and small-scale waterproof and dustproof household appliances. Its raw materials are mixed by precipitation method silica gel, high-fine molecular silicone gum and white carbon black. The molecular chain of the product is called heart, soft and comfortable to use! Compared with the materials of silica gel and rubber, they can be compared as follows: new technologies are used in traditional industries. Rubber materials have been heard for a long time in early years, so the comparison of rubber materials accounts for the majority. Up to now, more and more silicone rubber products have been reused because they can replace larger usage compared with rubber, namely environmental protection performance and various technologies, such as shape, pattern and color, etc. www.mingzhen2006.com

What are the fields of application of silicone keys for equipment

Characteristics and uses of silica gel Silicone is a kind of rubber. The vulcanized silicone rubber has heat resistance, cold resistance, ozone resistance, atmospheric aging resistance and good electrical insulation properties. The disadvantage of silicone rubber is that the tensile strength and elongation at break are small, and the compression deformation is large. Suitable for making parts used in high temperature, low temperature, sunlight, atmosphere, ozone environment and electrical insulation parts. Dimensional accuracy and recommend marking tolerance Trajectory material is an elastomer, compared to the plastic material, the direct impact of the shrinkage rate of many and complex factors, precision than plastic parts more difficult to do accurate, in the specific design should be fully considered, there should be no high precision. If the basic size is too large to meet the dimensional accuracy required by the design, it can be solved by the method of deformation of the positioning column with the substrate. Where dimensional accuracy is required, there must be room for convenient mold repair in the design. Etched text and patterns Silicone substrate can be designed out of the trademark pattern and text, in the molding products at the same time molding out. The group and text on the products are convex and concave two types, considering the convenience of mold processing, are generally designed as convex. In order to facilitate the replacement of marks or models, the marked parts can be designed as inserts during mold design. When the product model changes, only the marked parts in the mold cavity can be replaced to meet the needs of mark replacement. As part of this type of article, it should be designed to allow the presence of flash debris at the contour of the insert tile at the marked location. For conductive rubber, the stroke is generally 0.8~1.5mm; the exhaust groove (I. e. gas pit) is designed to prevent adsorption between the PCB and the key action. For tact switches, the stroke depends on the stroke of the switch itself (and the stroke for preventing misoperation), as described later. If the substrate is not bonded to the PCB board, the structural element of the air slot can be omitted. The key design has a hand feeling problem. Different graphs correspond to different hand feelings. According to experience, when (FP-FC)/FP is 40%-60%, the hand feeling is better. Key Typical Structure and Application According to the specific occasions where the keys are used, as well as the specific requirements of the product for the service life, pressing force, and hand feeling of the keys, the structure and application of the keys are shown in the following figure. The life of the silicone key is directly related to the material and the inclined wall structure, and is determined according to the design requirements. Part of the product silicone key life reference: Remote controller: 500000 times; Telephone type: 1 million times; Laptop computers: 4 million to 5 million times; Computer keyboard: 500~10 million; The life of silicone keys for monitoring products is defined as more than 500000 times; The ordinary life of B super silicone keys is defined as more than 1 million times,

The convenience of the use of industrial silicone buttons

In order to solve the above problems and technical defects, after continuous updating and design, a multi-station silicone button trimming machine was invented, and a utility model patent was applied. The utility model relates to a multi-position silicone button trimming machine, which comprises a base, a gantry frame and four cutting cylinders, and the four cutting cylinders are arranged vertically on the top of the gantry frame in a horizontal straight line. The beneficial effect achieved by the utility model is that the structure design is reasonable. By adopting the combination design of four reinforcement tables and four cutting blades on the gantry, the device can simultaneously trim four silicone button products. Thereby greatly improving the efficiency of trimming processing of silicone products. With the continuous expansion of the silicone button market, how to improve the processing efficiency of the silicone button has made producers pay more and more attention. The trimming of the silicone button is an important step in the production process of the silicone button, and the trimming of the traditional silicone button The processing efficiency cannot be improved, which affects the overall production efficiency of the silicone button. Various types of silica gel have different microporous structures due to their different manufacturing methods. The chemical composition and physical structure of silica gel determine that it has many characteristics that are difficult to replace other similar materials: high adsorption performance, good thermal stability, stable chemical properties, and high mechanical strength. Silica gel according to its pore size is divided into: macroporous silica gel, coarse pore silica gel, type B silica gel, fine pore silica gel. www.mingzhen2006.com

What are the molding techniques of rubber products?

Calendering: suitable for the manufacture of simple sheet, plate products. It is a method of pressing the mixture into a film through a calender called calendering. Some rubber products (such as tires, tape, hose, etc.) used in textile fiber materials, coated with a thin layer of glue, glue coating process is generally completed on the calender. The fiber material needs to be dried and dipped before calendering. The purpose of drying is to reduce the moisture content of the fiber material (so as to avoid water evaporation and foaming) and increase the temperature of the fiber material to ensure the quality of the calendering process. Dipper is the process before hanging glue, the purpose is to improve the binding performance of fiber materials and glue. Extrusion molding: Used for more complex rubber products, such as tire treads, rubber tubes, and metal wire surface coatings, which need to be manufactured by extrusion molding. The plastic mixture was placed into the hopper of the extruder. Under the extrusion of the screw, a method of continuous molding through a variety of mouth before pressing out, the rubber material is preheated to make the rubber material soft and easy to extrude, so as to obtain rubber products with smooth surface and accurate size. The rubber industry is one of the important basic industries of the national economy. It not only provides people with light industrial rubber products that are indispensable in daily life, but also provides various rubber production equipment or rubber parts for heavy and emerging industries (such as mining, transportation, construction, machinery and electronic products). It can be seen that there are many kinds of products in the rubber industry, and the backward industry is very extensive. Molding molding: can also be used to manufacture some complex shapes (such as cups, seals) of rubber products, with the help of the molding of the female and male molds, the rubber material is placed in the mold and heated. www.mingzhen2006.com

How to print the pattern on the transparent key

Some laser marking machines have played opaque keys. While using laser typing to knock out the paint, they will also burn the plastic parts that can transmit light, but cannot transmit light! Changzhou laser marking machine has a special device, which can adjust the machine to the function of laser processing light-transmitting key. The laser can clean the paint sprayed on the surface very clean without burning light-transmitting plastic, thus realizing light-transmitting key laser processing! YAG laser marking machine, the general laser marking machine can not do through the key! Light transmission keys, also called light transmission buttons, are widely used in electronic products. In dark environments, they can accurately and accurately find each button. The light transmission keys include a light transmission key body, an electronic switch located below the key body, and a luminous body. The luminous body is arranged on the lower side of the key body. A light guide body is arranged below the key body, and the light guide body has a body, the upper side of the body extends an extension to the position where the electronic switch is located, the outer surface of the extension is a first reflective slope, the lower surface of the body is a second reflective slope and doubles as a light touch surface that can be contacted with the electronic switch, and a light input part connected with the extension part and arranged corresponding to the light emitting body, the light emitting body emits light, the light is emitted to the first reflective slope through the introduction portion, and is reflected by the first reflective slope into the body, and the light entering the body is reflected by the second reflective slope out of the key body. The structure makes the light emitted from the light emitting surface of the key body more uniform, the key is more beautiful, and the user can accurately find the corresponding function key. The pattern and text on the keys are processed by laser typing! In our life, there are many keys and buttons that use laser typing and can transmit light, such as mobile phone keys, car audio keys, computer keys, and various electronic and electrical keys! www.mingzhen2006.com