Welcome to the official website of Dongguan Minz Rubber & Plastics Co., Ltd.

中文简体  | English

Dongguan Mingzhen Rubber & Plastic Products Co., Ltd.

18 yearsFocus on R & D and production of silicone rubber products

Become a respected supplier of silicone rubber products

Service Hotline:

+86-136 6988 8704

Dongguan Mingzhen Rubber & Plastic Products Co., Ltd.
18 years focus on silicone rubber products research and development and production
Professional customization

Dongguan Minz Rubber & Plastics Co., Ltd.

Add.: No.4, New Industrial Road, Shipai Tangwei, shipai town, Dongguan City
Tel: +86-0769-8665 2688
Fax: +86-796-8180 6477
Contact: Miss Li +86-136 6988 8704
Mailbox:lixiaoxia@dgminz.com.cn

What are the basic parameters of silicone rubber products

What are the basic parameters of silicone rubber products

2022-01-13 17:11:00

Silicone rubber is widely used in the field of application, because silicone rubber has the characteristics of non-toxic, no adhesion with other materials, and can withstand repeated cooking and disinfection. It is widely used in medical and health and food industry, such as medical equipment, drinking water equipment, sports equipment, Electronics, electrical appliances, lighting, audio, toys, security monitoring, automobiles, industrial machinery and equipment, etc. Silicone rubber soft joint is a linear polymer elastomer containing silicone oxygen bond, so it has high thermal stability. And has excellent resistance to ozone aging, oxygen aging, light aging and weather aging performance, at the same time has excellent electrical insulation properties, mildew resistance and high permeability, cold heat resistance, in -70 degrees Celsius to zero 250 degrees Celsius characteristics remain unchanged. Thermal conductive silica gel sheet is a kind of thermal conductive medium material synthesized by special process, which is based on silica gel and added with various auxiliary materials such as metal oxides. Thermal conductive silica gel sheet has good thermal conductivity and high-level pressure resistance. In the industry, it can also be called thermal conductive silicone pad, insulating thermal conductive sheet, soft thermal pad, etc. It has five characteristics: convenience, high thermal conductivity, stability, insulation, sound absorption and shock absorption In addition, silicone rubber products factory silicone rubber can also be used as a variety of electronic tubes or electrical components of the coating, sealing, with moisture-proof, dust-proof, shockproof and other effects. www.mingzhen2006.com

MORE
What kind of silicone products physiotherapy electrode widely used

What kind of silicone products physiotherapy electrode widely used

2022-01-12 16:47:10

MORE
Silicone key mold design processing technology

Silicone key mold design processing technology

2022-01-10 17:22:21

MORE
How silicone rubber sealing ring will not deform

How silicone rubber sealing ring will not deform

2022-01-08 16:50:33

In daily necessities, silicone rubber sealing ring is mainly used for waterproof, sealing and preservation. It can be used for a long time in the temperature range of -60 ℃ to 200 ℃. Performance of silicone rubber sealing ring 1. Excellent sealing performance and water resistance. 2. Good preservation effect, non-toxic and tasteless. 3. High temperature heating does not deform, no harmful substances. 4. After special inspection and testing, the tensile strength is good. 5. Long-term use does not fade. 6. Corona resistance, arc resistance, high and low temperature resistance, aging resistance, in line with relevant standards. Widely used in electrical and electronic, lighting, chemical and other fields of silicone rubber sealing strip, it has many application characteristics, can be used in many fields. Next, let's Jane Let's take a look at its application characteristics. Application Features 1. The sealing performance is good, and the weather resistance itself is also very good. 2. It has the characteristics of anti-aging performance. It can be applied to various smooth surface materials when pasting. It is very convenient to use and will not fall off when used in high temperature environment. 3. Good environmental performance and good insulation performance. No bubbles on the surface, no holes, long service life. www.mingzhen2006.com

MORE
What is the production process of silicone keys

What is the production process of silicone keys

2022-01-07 14:53:05

1. Spray laser carving The principle of laser processing technology is to project a laser beam onto a material and use the laser to interact with the material to melt, remove, weld the material or change the surface characteristics of the object. When the silicone key product process is spraying, there are mainly three ways to feed glue: direct glue feeding, bottom glue feeding and point glue feeding. ①. Direct glue feeding method When the product is solid and the height is not more than 1.5mm, the inclination of the product is not less than 1.5 degrees, and the product is not allowed to be glued in other ways, the mold adopts the direct glue feeding method. The glue feeding width of direct glue feeding is generally 2.50~3.00mm, the specific glue feeding width depends on the size of the product, the glue feeding thickness is generally 0.30~0.35mm, and the straight body position of 0.35~0.50mm is required to facilitate punching, and the foot column direction on the product frame should be in the opposite direction of the product surface. When the silicone key product is hollow and has a height of 1.8mm or less, and the inclination of the product is not less than 1.5 degrees, the mold adopts the direct glue feeding method. The glue feeding width of the direct glue feeding is generally 2.50-3.00mm, and the glue feeding thickness is generally 0.30-0.40mm. The specific glue feeding width depends on the size of the product, and the maximum straight body position is 0.30mm to facilitate punching, and in order to prevent the product from sticking to the front mold, the hollow glue position part of the product rear mold is generally not drawn, and the foot column direction on the product frame should be in the opposite direction of the product surface. Author: UG Product Design Teaching 2. Back printing For the processing process for the back of the printed key products, its glue into only one way, is directly into the glue way. The glue reducing wave bit should be made at the glue inlet point of the front mold, and the glue reducing depth is generally 0.5mm, which is to avoid scratching the screen plate due to the burr of the glue inlet during printing. The glue reducing wave bit can be made into arc shape and square shape. For the silicone keys printed on the back, the draft angle is generally not less than 1.5 degrees, the glue inlet width is generally 2.5~3.5mm, and the glue outlet width is generally 2~2.5mm. The glue inlet and outlet position is generally 0.~ 0.5mm straight extension to facilitate punching. The glue inlet and outlet thickness is generally 0.3~0.4mm, and the specific value is determined according to the size and height of the key product. And the direction of the foot column on the frame should be consistent with the surface direction of the key product. 3. Electroplating Plating is the process of using the principle of electrolysis to plate a thin layer of other metals or alloys on some metal surfaces. It is a process that uses electrolysis to attach a layer of metal film to the surface of metal or other material parts to prevent metal oxidation (such as corrosion), improve wear resistance, conductivity, reflection, corrosion resistance (copper sulfate, etc.) and improve appearance. For silicone key products with electroplating processing technology, the glue feeding method is generally direct glue feeding method and bottom glue feeding method. There is no difference between the characteristics of the glue feeding method of electroplated silicone key products and the glue feeding characteristics of sprayed key products. The size of the glue feeding point is generally 0.6 ~ Ф 0.8mm in Ф, the inclination of the glue feeding column is generally 6-8 degrees, the front mold of the key is provided with a mold, and the glue feeding point of the front mold surface is generally 0.3~0.5mm in depth, this is to prevent the glue injection point from being injured if the product needs to be lowered when the mold is changed in the future. www.mingzhen2006.com

MORE
< 1234...164 > proceed page